絕緣材料的體積電阻和表面電阻測量儀器供應商

一、概況：(1)適用標準：GB/T 22042-2008《服裝 防靜電性能 表面電阻率試驗方法》；EN 1149-1-1995 《防護服 靜電性能 第1部分表面電阻檢驗方法和要求》；GB/T 1410-2006《固體絕緣材料體積電阻率和表面電阻率試驗方法》（與標準IEC93-1980等效）；FZ/T 64013-2008 《靜電植絨毛絨》；SJ/10694-2006《電子產品制造與應用系統防靜電檢測通用規范》6.1及ASTM D257《絕緣材料的直流電阻或電導試驗方法》要求制作。 GB/T 2439-2001《硫化橡膠或熱塑性橡膠 導電性能和耗散性能電阻率的測定》；GB/T 10581-2006 《絕緣材料在高溫下電阻和電阻率的試驗方法》 ；GB/T1692-2008 《硫化橡膠絕緣電阻率的測定》；GB/T 12703.4-2010 《紡織品 靜電性能的評定第４部分：電阻率》

GB/T 10064-2006《測定固體絕緣材料絕緣電阻的試驗方法》。

(2)適用范圍：適用于測量粉末、粉體、顆粒物、電子元器件、介質材料、電線電纜、防靜電產品、如防靜電鞋、防靜電塑料橡膠制品、計算機房防靜電活動地板等電阻值等絕緣性能的檢驗和電子電器產品的絕緣電阻測量。本儀器測量高電阻測微電流。

(3)特點：采用四探針測量法、儀器體積小、重量輕、高穩定性，高準確度的數字高阻測量儀器。本儀器配不同的測量電極(夾具)可以測量不同材料 (固體、粉體或液體)的體積電阻率和表面電阻率或電導率及方阻。

(4)材料的導電性是用電阻率ρ（單位：歐·米）或電導率σ（單位：歐-1·米-1）來表示的。兩者互為倒數，并且都與試樣的尺寸無關，而只決定于材料的性質。工程上習慣將材料根據導電性質粗略地分為超導體、導體、半導體和絕緣體四類。

二、表面電率阻率/體積電阻率測試儀技術指標
1、電阻測量范圍：0.01×104Ω ～1×1018Ω。

電 阻 率：1.0×104 ～ 2.0×1016 Ω-m；方塊電阻：1.0×104 ～ 2.0×1012 Ω/□

2、液晶顯示: 電阻率、方阻、壓強、溫度、電導率、電流電壓、可輸入測試樣品數據（圓柱：直徑，高度；方體：長*寬*高）單位可以切換（mm、cm、m）

3、內置測試電壓：0-1000V任意可設定

4、 基本準確度：1%

5、使用環境: 溫度：0℃～40℃，相對濕度<80%

6、機內測試電壓: 10/50/100/250/500/1000V 任意切換

7、供電形式: AC 220V，50HZ，功耗約5W

8、測量模式：手動/自動量程。帶PC測試軟件（選購），USB通訊接口，軟件界面同步顯示、分析、保存和打印數據！

9、常用電極(夾具)裝置有（選購）：

A型：固體狀三環電極裝置；B型:粉末狀加壓裝置  C型:棒狀測量電極裝置

Surface electrical resistivity ratio / Tester volume resistivity

一、概況：(1)適用標準：GB/T 22042-2008《服裝 防靜電性能 表面電阻率試驗方法》；EN 1149-1-1995 《防護服 靜電性能 第1部分表面電阻檢驗方法和要求》；GB/T 1410-2006《固體絕緣材料體積電阻率和表面電阻率試驗方法》（與標準IEC93-1980等效）；FZ/T 64013-2008 《靜電植絨毛絨》；SJ/10694-2006《電子產品制造與應用系統防靜電檢測通用規范》6.1及ASTM D257《絕緣材料的直流電阻或電導試驗方法》要求制作。 GB/T 2439-2001《硫化橡膠或熱塑性橡膠 導電性能和耗散性能電阻率的測定》；GB/T 10581-2006 《絕緣材料在高溫下電阻和電阻率的試驗方法》 ；GB/T1692-2008 《硫化橡膠絕緣電阻率的測定》；GB/T 12703.4-2010 《紡織品 靜電性能的評定第４部分：電阻率》

One, overview: (1) standard: GB/T 22042-2008 "garment test methods for the prevention of electrostatic properties of surface resistivity"; EN 1149-1-1995 "protective clothing electrostatic properties of first part surface resistance test methods and requirements"; GB/T 1410-2006 "solid insulating material volume resistivity and surface resistivity test method" (international standard IEC93-1980 equivalent); FZ/T 64013-2008 "electrostatic flocking Plush"; SJ/10694-2006 "electronic product manufacturing and application of anti electrostatic detection system general specification 6.1" and ASTM D257 "DC resistance or conductance of insulating materials test method" requirement. GB/T 2439-2001 "rubber vulcanized or thermoplastic conductive properties and dissipative properties determination of resistivity of the" GB/T 10581-2006 "; insulating materials under high temperature resistance and resistivity test method" GB/T1692-2008 "; vulcanized rubber insulation resistivity measurement"; GB/T 12703.4-2010 "textile xerographic performance evaluation of fourth parts: the resistivity"

GB/T 10064-2006《測定固體絕緣材料絕緣電阻的試驗方法》。

GB/T 10064-2006 "determination of solid insulation resistance of insulation materials test method".

(2)適用范圍：適用于測量粉末、粉體、顆粒物、電子元器件、介質材料、電線電纜、防靜電產品、如防靜電鞋、防靜電塑料橡膠制品、計算機房防靜電活動地板等電阻值等絕緣性能的檢驗和電子電器產品的絕緣電阻測量。本儀器測量高電阻測微電流。

(2) the scope of application: suitable for measuring insulation resistance measurement of powder, powder, particles, electronic components, materials, wire and cable, anti-static products, such as anti-static shoes, anti-static plastic and rubber products, computer room activities of anti-static flooring, resistance and insulation performance test and electronic products. The instrument for measuring high resistance measuring current.

(3)特點：采用四探針測量法、儀器體積小、重量輕、高穩定性，高準確度的數字高阻測量儀器。本儀器配不同的測量電極(夾具)可以測量不同材料 (固體、粉體或液體)的體積電阻率和表面電阻率或電導率及方阻。

(3) features: the use of four probe measurement, the instrument has the advantages of small volume, light weight, high stability, high resistance measuring instrument with high accuracy. This instrument measuring electrode with different (fixture) can measure different materials (solid, powder or liquid) of the volume resistivity and surface resistivity or conductivity and resistance.

(4)材料的導電性是用電阻率ρ（單位：歐·米）或電導率σ（單位：歐-1·米-1）來表示的。兩者互為倒數，并且都與試樣的尺寸無關，而只決定于材料的性質。工程上習慣將材料根據導電性質粗略地分為超導體、導體、半導體和絕緣體四類。

(4) a conductive material with resistivity ρ (unit: O. m) or conductivity σ (unit: Euro -1 · m -1) to represent. Both reciprocal, and has nothing to do with the specimen size, and only depends on material properties. The project will be accustomed to materials based on conductive properties roughly divided into super conductor, conductor, semiconductor and insulator four

二、表面電率阻率/體積電阻率測試儀技術指標

Two, the surface electric resistivity rate / technical index of volume resistivity tester

1、電阻測量范圍：0.01×104Ω ～1×1018Ω。

1, resistance measurement range: 0.01 × 104 ~ 1 × 1018 Ω.

電 阻 率：1.0×104 ～ 2.0×1016 Ω-m；方塊電阻：1.0×104 ～ 2.0×1012 Ω/□

Electric resistance rate: 1 × 104 to 2 × 1016 Ω -m; square resistance: 1 × 104 to 2 × 1012 Ω / □

2、液晶顯示: 電阻率、方阻、壓強、溫度、電導率、電流電壓、可輸入測試樣品數據（圓柱：直徑，高度；方體：長*寬*高）單位可以切換（mm、cm、m）

2, liquid crystal display: resistivity, resistance, pressure, temperature, conductivity, current and voltage, can input test sample data (cylinder diameter, height:; square: length * width * height) unit can switch (mm, cm, m)

3、內置測試電壓：0-1000V任意可設定

3, the built-in test voltage: 0-1000V can be arbitrarily set

4、 基本準確度：1%

4, basic accuracy: 1%

5、使用環境: 溫度：0℃～40℃，相對濕度<80%

5, the use of the environment: temperature: 0 ℃ ~ 40 ℃, relative humidity <80%

6、機內測試電壓: 10/50/100/250/500/1000V 任意切換

6, the built-in test voltage: 10/50/100/250/500/1000V arbitrary switching

7、供電形式: AC 220V，50HZ，功耗約5W

7, the power supply form: AC 220V, 50HZ, power consumption is about 5W

8、測量模式：手動/自動量程。帶PC測試軟件（選購），USB通訊接口，軟件界面同步顯示、分析、保存和打印數據！

8, measurement mode: manual / automatic range. With PC test software (optional), USB communication interface, the interface of the software synchronous display, analysis, save and print data!

9、常用電極(夾具)裝置有（選購）：

9, common electrode (fixture) device (optional):

A型：固體狀三環電極裝置；B型:粉末狀加壓裝置 C型:棒狀測量電極裝置

Type A: solid three electrode device; type B: powder compression device of C type: a rod-shaped measuring electrode device

The electrical properties of China aerotime and common instrument of insulating material

ZWN萬能材料試驗機

ZWN universal material testing machine

ZJC-10KV-200KV電壓擊穿試驗儀

ZJC-10KV-200KV voltage breakdown tester

ZST-121體積表面電阻率測定儀

Determination of ZST-121 volume and surface resistivity instrument

ZTS-121碳素材料電阻率測試儀

ZTS-121 carbon material resistivity tester

ZST-122電線電纜導體半導體材料電阻率測試儀

Instrument cable conductor semiconductor material resistivity ZST-122

M-200橡膠塑料滑動摩擦試驗機（國標，非國標，可定制）

M-200 rubber plastic sliding friction testing machine (GB, non standard, can be customized)

ZJD-A介電常數介質損耗測試儀（可測試固體液體）

ZJD-A dielectric loss tester (testing of solid liquid)

ZJD-B學校介電常數介質損耗測試儀

ZJD-B school special dielectric loss tester

ZJD-C高頻介電常數介質損耗測試儀

ZJD-C high frequency dielectric loss tester

ZJD-50HZ-100HZ工頻介電常數介質損耗測試儀

ZJD-50HZ-100HZ frequency dielectric loss tester

ZDH-20KV絕緣材料耐電弧性能試驗儀/高電壓小電流測試儀

Arc resistance tester / high voltage low current tester ZDH-20KV insulating material

ZWK-300A液顯熱變形維卡軟化點溫度測定儀

ZWK-300A liquid heat deformation temperature of VEKA softening point tester

ZWK-300B計算機控制熱變形維卡溫度試驗機

VEKA ZWK-300B computer control thermal deformation temperature testing machine

ZWK-500計算機控制熱變形維卡溫度試驗機

VEKA ZWK-500 computer control thermal deformation temperature testing machine

ZQYH-96塑料球壓痕硬度計

ZQYH-96 plastic ball indentation hardness tester

ZRT-400Z熔體流動速率測定儀/熔融指數儀

ZRT-400Z melt flow rate meter / melt index apparatus

ZMD-A計算機控制馬丁耐熱試驗儀

ZMD-A computer control Martin heat resistance tester

☆中航時代燃燒性能儀器

☆ China aerotime combustion performance instrument

ZRS-3水平垂直燃燒試驗儀

ZRS-3 horizontal and vertical burning tester

ZDG-1000單根電線電纜垂直燃燒試驗儀

ZDG-1000 vertical burning test instrument of single wire and cable

ZLD-600V漏電起痕試驗儀

ZLD-600V tracking test apparatus

ZLD-6000V高壓漏電起痕試驗儀

ZLD-6000V high voltage tracking test apparatus

ZKR-A建材可燃性試驗爐

ZKR-A building materials flammability test furnace

ZBR-B建材不燃性試驗爐

ZBR-B building materials not combustion test furnace

ZZR-A汽車內飾材料阻燃性能試驗機

Flame retardant properties of automotive interior materials testing machine ZZR-A

ZY-A針焰試驗儀

ZY-A needle flame test apparatus

ZR-A灼熱絲試驗儀

ZR-A glow wire test apparatus

ZDR-C導熱系數測定儀

Determination of ZDR-C thermal conductivity coefficient instrument

☆中航時代海綿泡沫檢測儀器

☆ China aerotime sponge foam detecting instrument

ZYX-2000海綿泡沫壓陷硬度測定儀

ZYX-2000 sponge foam indentation hardness tester

ZLQ-500海綿泡沫落球回彈儀

ZLQ-500 sponge foam ball rebound tester

ZPL-2000海綿泡沫疲勞沖擊測定儀

ZPL-2000 sponge foam fatigue impact tester

ZLS-1000海綿拉伸強度試驗機

ZLS-1000 sponge tensile strength testing machine

ZYS-200海綿壓縮*變形試驗機

Compression testing machine ZYS-200 sponge

ZQG-500海綿泡沫切割機

ZQG-500 sponge foam cutting machine

ZMD-A海綿密度測定儀

ZMD-A sponge density measuring instrument

ZYZS-C氧指數測定儀

ZYZS-C oxygen index tester

ZR-B海綿泡沫阻燃性能試驗箱

Test box flame retardant sponge foam properties of ZR-B

☆中航時代沖擊試驗機系類

☆ China aerotime impact testing machine series

ZWD系類低溫脆性試驗機（單試樣、多試樣）

ZWD series of brittle - temperature testing machine (single specimen, multiple sample)

ZJZL-A簡支梁沖擊試驗機（指針，數顯）

ZJZL-A Charpy impact testing machine (pointer, digital display)

ZXBL-A懸臂梁沖擊試驗機（指針，數顯）

ZXBL-A cantilever beam impact testing machine (pointer, digital display)

ZJX-A簡支梁懸臂梁組合沖擊試驗機（指針，數顯）

ZJX-A simply supported cantilever beam combination impact testing machine (pointer, digital display)

ZLC-2000落球沖擊試驗機

ZLC-2000 falling ball impact test machine

ZLB-30管材落鏢沖擊試驗機

ZLB-30 pipe falling dart impact tester

BCM-03擺錘薄膜沖擊試驗機

Pendulum impact testing machine of BCM-03 thin films

ZJS-300A金屬擺錘沖擊試驗機

ZJS-300A metal pendulum impact testing machine

ZJS-300B全自動低溫沖擊試驗機

ZJS-300B automatic temperature impact test machine

☆中航時代制樣機系類

☆ China aerotime system prototype system

ZWN-A萬能制樣機

The ZWN-A universal machine

ZQK-A手動缺口制樣機

ZQK-A manual gap system prototype

ZQK-B自動缺口制樣機

ZQK-B automatic gap system prototype

ZYL-A手動啞鈴型制樣機

ZYL-A manual dumbbell system prototype

ZQK-B自動啞鈴型制樣機

ZQK-B automatic dumbbell system prototype

沖片機（氣動、液壓）

Punching machine (pneumatic, hydraulic)

☆中航時代環境試驗箱系類

☆ China aerotime environmental test box series

ZJB-C高低溫交變試驗箱

ZJB-C alternating high and low temperature test box

ZQH-C人工氣候箱

ZQH-C artificial climate box

ZLH-A老化試驗箱

ZLH-A aging test box

ZWS-02高低溫試驗箱

ZWS-02 high low temperature test box

ZYZS-C氧指數測定儀

ZYZS-C oxygen index tester

☆售后服務

☆ after sale service

一、安裝調試：協助試驗機的安裝，負責試驗機的運輸、調試。

A, installation debugging: assist testing machine installation, transportation, commissioning test machine.

二、驗收標準：試驗機按訂貨技術附件進行驗收。終驗收在買方進行，對用戶提供的試樣進行試驗，并提供測試報告。

Two, acceptance criteria: testing machine for acceptance according to the order of the technical annex. Final acceptance in the buyer, sample provides to the user testing, and provide the test report.

三、培訓：安裝調試同時，在儀器操作現場一次性免費培訓操作人員2-3名，該操作人員應是由需方選派的長期穩定的員工，培訓后能夠對設備基本原理、軟件使用、操作、維護事項理解和應用，使人員能夠獨立操作設備對樣品進行檢測、分析，同時能進行基本的維護。

Three, training: installation at the same time, the instrument operation on-site one-time free training 2-3, the operating personnel shall be appointed by the long-term stability of the staff, training to basic principle, software use, operation, maintenance and application of understanding, so that workers can operate independently equipment to detect samples, analysis, at the same time can carry out basic maintenance.

四、軟件升級：終生免費提供新版本控制軟件。

Four, software upgrade: free lifetime provides new version control software.

五、保修：

Five, the warranty:

1、設備保修兩年，終身售后服務，一年內非人為損壞的零部件免費更換，保修期內接到用戶邀請后， zui遲響應時間為2小時內，在與用戶確認故障后，我公司會在48小時內派工程師到達現場進行免費服務，盡快查清故障所在位置和故障原因，并向用戶及時報告故障的原因和排除辦法 。

1, equipment warranty of two years, lifetime after sale service, within one year of the non-human damage parts replaced free of charge, the warranty period the user received the invitation, but the response time is 2 hours, with user confirmation after a failure, I will send engineers arrived at the scene for free within 48 hours of service, find out the fault location and the fault reason as soon as possible, and to users timely report failures and troubleshooting.

2、保修期內人為損壞的零部件按采購（加工）價格收費更換。

2, the warranty period of man-made damaged parts procurement according to the price of replacement (processing).

3、保修期外繼續為用戶提供優質技術服務，在接到用戶維修邀請后3天內派工程師到達用戶現場進行維修。并享有優惠購買零配件的待遇。

3, the warranty period to continue to provide high-quality technical services for the users, to invite users to repair within 3 days after the arrival of the user site to send engineers to repair. And enjoy the preferential purchase of spare parts.

4、傳感器過載及整機電路超壓損壞不在保修范圍內。

4, the sensor and the circuit overload overpressure damage not covered under warranty.

六、售后管理：

Six, customer service management:

我公司實現計算機化管理，實行客戶定期回訪制度，定期復查設備的工作情況，定期指導用戶對設備進行保養和檢測，以便設備正常運轉，跟蹤客戶的設備使用情況，以便及時對設備進行維護。

Our company to realize the computer management, carry out customer regular ephone return visit system, work regular examination equipment, regular ephone guide users to maintain and test the equipment, so that the normal operation of equipment, track customer equipment usage, so that timely equipment for maintenance.